Skip to main content

Articles

Page 1 of 1

  1. The biocompatible polyurethane acrylate (PUA) nanopillars were fabricated by soft lithography using three different sizes of nanobeads (350, 500, and 1000 nm), and the human adipose-derived stem cells (hASCs) ...

    Authors: Jihun Kang, Eun-Hye Kang, Young-Shik Yun, Seungmuk Ji, In-Sik Yun and Jong-Souk Yeo

    Citation: Applied Microscopy 2020 50:26

    Content type: Novus Imago

    Published on:

  2. Scanning acoustic microscopy (SAM) or Acoustic Micro Imaging (AMI) is a powerful, non-destructive technique that can detect hidden defects in elastic and biological samples as well as non-transparent hard mate...

    Authors: Hyunung Yu

    Citation: Applied Microscopy 2020 50:25

    Content type: Review

    Published on:

  3. The development of the femtosecond laser (fs laser) with its ability to provide extremely rapid athermal ablation of materials has initiated a renaissance in materials science. Sample milling rates for the fs ...

    Authors: Ben Tordoff, Cheryl Hartfield, Andrew J. Holwell, Stephan Hiller, Marcus Kaestner, Stephen Kelly, Jaehan Lee, Sascha Müller, Fabian Perez-Willard, Tobias Volkenandt, Robin White and Thomas Rodgers

    Citation: Applied Microscopy 2020 50:24

    Content type: Review

    Published on:

  4. In-situ transmission electron microscopy (TEM) holders that employ a chip-type specimen stage have been widely utilized in recent years. The specimen on the microelectromechanical system (MEMS)-based chip is c...

    Authors: Yena Kwon, Byeong-Seon An, Yeon-Ju Shin and Cheol-Woong Yang

    Citation: Applied Microscopy 2020 50:22

    Content type: Technical Report

    Published on:

  5. Arthropods have an open circulatory system with a simple tubular heart, so it has been estimated that the contractile pumping structure of the cardiac muscle will be less efficient than that of vertebrates. Ne...

    Authors: Yan Sun, Seung-Min Lee, Bon-Jin Ku and Myung-Jin Moon

    Citation: Applied Microscopy 2020 50:20

    Content type: Research

    Published on:

  6. Deformation twinning, one of the major deformation modes in a crystalline material, has typically been analyzed using generalized planar fault energy (GPFE) curves. Despite the significance of these curves in und...

    Authors: Hong-Kyu Kim, Sung-Hoon Kim and Jae-Pyoung Ahn

    Citation: Applied Microscopy 2020 50:19

    Content type: Research

    Published on:

  7. The olfactory anatomy and histology of Lethenteron reissneri were researched using a stereo microscope, a light microscope, and a scanning electron microscope. As in other lampreys, it shows same characters as fo...

    Authors: Hyun-Tae Kim and Jong-Young Park

    Citation: Applied Microscopy 2020 50:18

    Content type: Research

    Published on:

  8. Sample preparation including dehydration and drying of samples is the most intricate part of scanning electron microscopy. Most current sample preparation protocols use critical-point drying with liquid carbon...

    Authors: Raktim Bhattacharya, Sulagna Saha, Olga Kostina, Lyudmila Muravnik and Adinpunya Mitra

    Citation: Applied Microscopy 2020 50:15

    Content type: Technical Report

    Published on:

  9. The human turbinate-derived mesenchymal stem cells (hTMSCs), which were DiI-labeled and transplanted into the subretinal space in degenerating mouse retina, were observed in retinal vertical sections processed...

    Authors: Yong Soo Park, Yeonji Kim, Sung Won Kim and In-Beom Kim

    Citation: Applied Microscopy 2020 50:11

    Content type: Novus Imago

    Published on:

  10. The cerebellum is a region of the brain that plays an important role in motor control. It is classified phylogenetically into archicerebellum, paleocerebellum and neocerebellum. The Purkinje cells are lined in...

    Authors: Hyun-Wook Kim, Seung Hak Oh, Se Jeong Lee, Ji eun Na and Im Joo Rhyu

    Citation: Applied Microscopy 2020 50:6

    Content type: Research

    Published on:

  11. The present study reports the novel synthesis of Zinc nanoparticles (Zn NPs) by thermal decomposition method and its characterisation by Scanning Electron Microscope (SEM), Transmission Electron Microscope (TE...

    Authors: Giriraj Tailor, Jyoti Chaudhay, Deepshikha Verma and Bhupendra Kr. Sarma

    Citation: Applied Microscopy 2019 49:20

    Content type: Technical Report

    Published on:

    The Publisher Correction to this article has been published in Applied Microscopy 2020 50:3

  12. Electron energy loss spectroscopy (EELS) is an analytical technique that can provide the structural, physical and chemical information of materials. The EELS spectra can be obtained by combining with TEM at su...

    Authors: Jeong Eun Chae, Ji-Soo Kim, Sang-Yeol Nam, Min Su Kim and Jucheol Park

    Citation: Applied Microscopy 2019 50:2

    Content type: Short Report

    Published on:

  13. The detailed anatomy, ultrastructure and histology of the olfactory organ of Micropterus salmoides were investigated by a stereo microscope, a light microscope, and a scanning electron microscope. Its external st...

    Authors: Hyun Tae Kim, Seung Woon Yun and Jong Young Park

    Citation: Applied Microscopy 2019 49:18

    Content type: Research

    Published on:

  14. As more W replaced Mo in alumina-forming austenitic stainless steels, weight gain by oxidation decreased after 336 h at 1053 K. Electron microscopy revealed slower growth of scale in the presence of more numer...

    Authors: Jun-Yun Kang, Heon-Young Ha, Sung-Dae Kim, Jun Young Park, Min-Ho Jang and Tae-Ho Lee

    Citation: Applied Microscopy 2019 49:13

    Content type: Research

    Published on:

  15. Herein, we synthesize a core/shell Pt/a-CoOx nanocomposite via one-step synthesis using a strong reaction agent of borane t-butylamine(BBA) at 200 °C. Transmission electron microscopy study shows that the morphol...

    Authors: Daewoon Kim, Sung Joo Kim and Jong Min Yuk

    Citation: Applied Microscopy 2019 49:12

    Content type: Research

    Published on:

  16. Autophagy, a highly conserved process of eukaryotic cellular recycling, plays an important role in cell survival and maintenance. Dysfunctional autophagy contributes to the pathologies of many human diseases. ...

    Authors: Minkyo Jung, Hyosun Choi and Ji Young Mun

    Citation: Applied Microscopy 2019 49:11

    Content type: Review

    Published on:

  17. Contemporary microscopic imaging at near-atomic resolution of diverse embodiments in liquid environment has gained keen interest. In particular, Electron Microscopy (EM) can provide comprehensive framework on ...

    Authors: Anahita Vispi Bharda and Hyun Suk Jung

    Citation: Applied Microscopy 2019 49:9

    Content type: Review

    Published on:

  18. Focused ion beam method, which has excellent capabilities such as local deposition and selective etching, is widely used for micro-electromechanical system (MEMS)-based in situ transmission electron microscopy...

    Authors: Byeong-Seon An, Yena Kwon, Jin-Su Oh, Yeon-Ju Shin, Jae-seon Ju and Cheol-Woong Yang

    Citation: Applied Microscopy 2019 49:6

    Content type: Technical Report

    Published on:

  19. We applied the advanced bitmap-assisted patterning function of focused ion beam to fabricate microscale sculpture of the ‘BangTanSoNyeonDan’ known as BTS members, the world-wide famous K-pop boyband. With the ...

    Authors: Haneul Choi, Young Woo Jeong and Hye Jung Chang

    Citation: Applied Microscopy 2019 49:4

    Content type: Novus Imago

    Published on:

  20. Graphene, which is one of the most promising materials for its state-of-the-art applications, has received extensive attention because of its superior mechanical properties. However, there is little experiment...

    Authors: Kangsik Kim, Jong Chan Yoon, Jaemin Kim, Jung Hwa Kim, Suk Woo Lee, Aram Yoon and Zonghoon Lee

    Citation: Applied Microscopy 2019 49:3

    Content type: Research

    Published on:

  21. Nanomaterials (NMs) find widespread use in different industries that range from agriculture, food, medicine, pharmaceuticals, and electronics to cosmetics. It is the exceptional properties of these materials a...

    Authors: Amall Ramanathan

    Citation: Applied Microscopy 2019 49:2

    Content type: Review

    Published on:

  22. Joints of three-dimensional (3D) rutile-type (r) tin dioxide (SnO2) nanowire networks, produced by the flame transport synthesis (FTS), are formed by coherent twin boundaries at (101)r serving for the interpenetr...

    Authors: Viktor Hrkac, Niklas Wolff, Viola Duppel, Ingo Paulowicz, Rainer Adelung, Yogendra Kumar Mishra and Lorenz Kienle

    Citation: Applied Microscopy 2019 49:1

    Content type: Research

    Published on:

Affiliated with